OSHA 10-hour Construction Safety & Health Course
This course is intended for entry-level participants and is intended to provide instruction on a variety of general construction safety and health standards. Course topics will include Introduction to OSHA, Electrical Safety, Fall Protection, Ladder Safety, Excavation Safety, Scaffold Safety, Materials Handling, Forklift Safety, Personal Protective Equipment and Permit-Required Confined Space Entry. Upon successful completion of this course participants will receive an OSHA Construction Safety and Health 10-hour Card.
OSHA 30-hour Construction Safety & Health Course
The OSHA 30 Hour Construction Industry Outreach Training course is a comprehensive safety program designed for anyone involved in the construction industry (workers and supervisors). This course places special emphasis on hazard identification, control and prevention. Course includes several topics valuable to construction related work, such as Fall Protection, Excavations, Scaffolding, OSHA Inspection Procedures and more. Upon successful completion, students will receive Course Completion Cards from OSHA for the 30 Hour Construction Industry.
OSHA 10-hour General Industry Safety & Health Course
This OSHA General Industry 10 hour training course is designed for employees, foremen, job supervisors, and anyone involved in general industry operations. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1910.
OSHA 30-hour General Industry Safety & Health Course
The 30 Hour General Industry course is intended for supervisors, management and any other company personnel with some safety responsibility for analyzing work-site hazards. The OSHA 30 course provides students with an in-depth study of hazard identification, avoidance, control and prevention in the workplace. Students will be able to better integrate workable and OSHA compliant safety solutions in their facilities after completing this course.
Bloodborne Pathogens Course
The 4 hour course will provide participants with the knowledge required to identify bloodborne pathogens and to protect against exposure. The course meets requirements established by the Occupational Safety and Health Administration. Main topics covered in this course include transmission, prevention/control of exposure, incident response, and emergency procedures. A 4-hour training course which satisfies the minimum training requirements set forth in 29 CFR 1910.1030.
HealthCare Construction / Infection Control Risk Assessment (ICRA) Course
The 4 hour HealthCare Construction / Infection Control Risk Assessment (ICRA) course is designed to introduce you to the significant problem of infection control, emerging infectious diseases, and exposure risks. You will learn typical industry terms and phrases, background information about HVAC and Mechanical systems, maintenance, environmental hygiene, design, and analysis of building problems.
Topics include:
• Health care Environment and the PDC Process
• Fire and Life Safety
• Medical Gas
• Risk Assessment
• Risk Management
• Infection Prevention
• Zika Virus preparedness Awareness
• MEP (Mechanical, Electrical and Plumbing)
• Technology
• Project Requirements
• Resources
On-site Compliance Services
All pricing for these services is on-request.
FIT TESTS
|
OSHA 29 CFR 1910.134 Qualitative Respirator Fit Test
|
$50.00
|
|
Quantitative Fit Test
|
On-request
|
|
Half-mask respirator
|
$75.00/each
|
|
HEPA filters
|
$15.00/pair
|
|
Combination filters
|
$25.00/pair
|
MEDICAL CLEARANCE AND BIOLOGICAL SURVEILLANCE
|
PFT (Pulmonary Function Test)
|
On-request
|
|
Blood-Lead analysis by an OSHA-certified laboratory
on a RUSH Turn-Around-Time (TAT)
|
On-request
|
|
Blood-Lead Testing by a Licensed Phlebotomist
|
On-request
|
|
Respirator OSHA Medical Evaluation by PLHCP (Physician or Licensed Health Care Professional)
|
$250.00
|
|
Issuance of Certifications ID cards with photos
|
On-request
|
|
OSHA 29 CFR 1926.62 Lead Awareness Training by OSHA/EPA/DOH -approved Instructors for Lead Exposure and Lead Health Hazards in construction
|
On-request
|
|
OSHA 29 CFR 1910.134 Respiratory Protection Awareness Training by OSHA/EPA/DOH -approved Instructors
|
On-request
|
|
Exposure assessment monitoring will be performed by a Licensed Environmental Specialist for up to two (2) client’s employees during identified tasks for one (1) day and will include laboratory analyses, testing equipment and sampling media
|
On-request
|
|
Issuance of a Report, documenting the findings for the potential Negative Exposure Assessment (NEA) or other findings
|
On-request
|
2-hour Hazard Communication (HazCom) Course
The hazard communication standard (HazCom), created and enforced under the Occupational Safety and Health Administration (OSHA), ensures that employers keep their employees informed about hazardous chemicals in the workplace. The training program includes overview of Safety Data Sheets (SDSs), Labeling and Marking Systems, Employee Training and Written Plan.
As of June 1, 2015, the Hazard Communication Standard (HCS) will require new Safety Data Sheets (SDSs) [formerly known as Material Safety Data Sheets (MSDSs) to communicate the hazards of hazardous chemical products] to be in a uniform format, and include the section numbers, the headings, and associated information.
Confined Space Entrant/Attendant Program
The Entrant/Attendant Training Program provides instruction in the regulatory requirements and procedures necessary for work in the confined space environment. The course provides an overview of OSHA regulation 29 CFR 1910.146 and meets all applicable training standards. The course is designed for those individuals who work in confined space, to let them know their job is dangerous. Serious injury or death in a confined space can be the result of asphyxiation, engulfment, electric shock, falls and heat stress. The Occupational Safety and Health Administration (OSHA) believes 85% of these accidents can be prevented if you learn about the hazards faced on the job.
Also, Subpart AA―Confined Spaces in Construction, just became a final rule in effect since August of 2015 - §1926.1207.
Confined Space Entry Supervisor Program
The Entry Supervisor Training Program is designed for those companies or agencies whose employees regularly enter confined space environments. The Entry Supervisor Program provides instruction in the regulatory requirements and procedures necessary for work in the confined space environment. The course provides an overview of OSHA regulation 29 CFR 1910.146 and meets all applicable training standards.
Also, Subpart AA―Confined Spaces in Construction, just became a final rule in effect since August of 2015 - §1926.1207.
Globally Harmonized System (GHS) Course
To remain compliant with the Occupational Safety and Health Administrations' 2012 Hazard Communication Standard, the U. S. Department of Labor (OSHA) is requiring that all employees be trained on the new Globally Harmonized System of Classification and Labeling of Chemicals (i.e., pictograms, hazard statements, precautionary statements, and signal words) and Safety Data Sheet (SDS) format.
8-Hour Fall Protection Training Course
Upon implementation of Local Law 196 of 2017, the newly added Section BC 3321: Construction Site Safety Training (SST) (Chapter 33 of NYC DOB Building Code) states that “each permit holder at a building site for which a construction superintendent, site safety manager or site safety coordinator is required shall be responsible for ensuring that each worker has an SST card…and each worker who is serving as a Site Safety Manager, Site Safety Coordinator, Concrete Safety Manager, Construction Superintendent or a Competent Person at such site has an SST Supervisor Card”. Obtaining such card will require the completion of “additional SST credits, including 8 SST credits relating to safeguarding against the dangers posed by falling workers and objects.” According to OSHA out of 991 total worker deaths in construction in 2016, there were 384 due to falls and 93 due to Struck by Object. This course covers the identification, evaluation, prevention and control of fall hazards in the construction industry. Course topics include principles of fall protection, components and limitations of fall arrest systems, guard rail systems and safety net systems recognition and prevention of struck-by objects hazards, as well as an overview of the current ANSI/ASSE Z359 FALL PROTECTION CODE (effective August 14, 2017). Upon completion of the course, students will have an understanding of identifying fall hazards and methods to control and eliminate the hazards.
