Standards update- Energy, oil & gas
Full list
Chemical technology
BS ISO 19880-1:2020 | Gaseous hydrogen. Fuelling stations. General requirements |
BS ISO 19880-8:2019 | Gaseous hydrogen. Fuelling stations. Fuel quality control |
BS ISO 22734:2019 | Hydrogen generators using water electrolysis. Industrial, commercial, and residential applications. Part : Residential applications |
Company organization, management and quality
BS EN ISO/IEC 27019:2020 | Information technology. Security techniques. Information security controls for the energy utility industry |
Electrical engineering
BS 148:2020 | Recycled mineral insulating oil for transformers and switchgear. Specification |
BS EN 50341-2-24:2019 | Overhead electrical lines exceeding AC 1 kV. National Normative Aspects (NNA) for Romania (based on EN 50341-1:2012) |
BS EN 60754-1:2014+A1:2020 | Test on gases evolved during combustion of materials from cables. Determination of the halogen acid gas content |
BS EN 60754-2:2014+A1:2020 | Test on gases evolved during combustion of materials from cables. Determination of acidity (by pH measurement) and conductivity |
BS EN IEC 60086-6:2020 | Primary batteries. Guidance on environmental aspects |
BS EN IEC 60947-5-2:2020 | Low-voltage switchgear and controlgear. Control circuit devices and switching elements. Proximity switches |
BS EN IEC 61854:2020 | Overhead lines. Requirements and tests for spacers |
BS EN IEC 61897:2020 | Overhead lines. Requirements and tests for Aeolian vibration dampers |
BS EN IEC 62932-1:2020 | Flow battery energy systems for stationary applications. Terminology and general aspects |
BS EN IEC 62932-2-1:2020 | Flow battery energy systems for stationary applications. Performance general requirements and test methods |
BS EN IEC 62932-2-2:2020 | Flow battery energy systems for stationary applications. Safety requirements |
BS EN IEC 63093-5:2018 | Ferrite cores. Guidelines on dimensions and the limits of surface irregularities. EP-cores and associated parts for use in inductors and transformers |
BS EN IEC 63115-1:2020 | Secondary cells and batteries containing alkaline or other non-acid electrolytes. Sealed nickel-metal hydride cells and batteries for use in industrial applications. Performance |
BS IEC SRD 62559-4:2020 | Use case methodology. Best practices in use case development for IEC standardization processes and some examples for application outside standardization |
PD IEC TR 60076-26:2020 | Power transformers. Functional requirements of insulating liquids for use in power transformers |
PD IEC TS 63208:2020 | Low-voltage switchgear and controlgear. Security aspects |
Electromagnetic compatibility
BS EN 55016-1-3:2006+A2:2020 | Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Ancillary equipment. Disturbance power |
BS EN 61000-4-25:2002+A2:2020 | Electromagnetic compatibility (EMC). Testing and measurement techniques. HEMP immunity test methods for equipment and systems |
BS EN IEC 55015:2019+A11:2020 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
BS EN IEC 60118-13:2020 | Electroacoustics. Hearing aids. Requirements and methods of measurement for electromagnetic immunity to mobile digital wireless devices |
BS EN IEC 61000-4-11:2020 | Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
BS IEC 61000-4-36:2020 | Electromagnetic compatibility (EMC). Testing and measurement techniques. IEMI immunity test methods for equipment and systems |
Energy and heat transfer engineering
BS EN IEC 61225:2020 | Nuclear power plants. Instrumentation, control and electrical power systems. Requirements for static uninterruptible DC and AC power supply systems |
BS EN IEC 62282-3-100:2020 | Fuel cell technologies. Stationary fuel cell power systems. Safety |
BS EN IEC 62282-8-101:2020 | Fuel cell technologies. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of solid oxide single cells and stacks, including reversible operation |
BS ISO 37160:2020 | Smart community infrastructure. Electric power infrastructure. Measurement methods for the quality of thermal power infrastructure and requirements for plant operations and management |
PD ISO/TS 17225-9:2020 | Solid biofuels. Fuel specifications and classes. Graded hog fuel and wood chips for industrial use |
Metrology and measurement
BS ISO/ASTM 52628:2020 | Standard practice for dosimetry in radiation processing |
Petroleum and related technologies
BS EN 590:2013+A1:2017 | Automotive fuels. Diesel. Requirements and test methods |
BS EN ISO 20088-2:2020 | Determination of the resistance to cryogenic spill of insulation materials. Vapour exposure |
BS EN ISO 20321:2020 | Petroleum, petrochemical and natural gas industries. Safety of machineries. Powered elevators |
BS EN ISO 8222:2020 | Petroleum measurement systems. Calibration. Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) |
BS EN ISO 8973:1999+A1:2020 | Liquefied petroleum gases. Calculation method for density and vapour pressure |
BS ISO 556:2020 | Coke (greater than 20 mm in size). Determination of mechanical strength |
PD CEN/TR 17491:2020 | Automotive fuels. Information on aniline, N-methyl aniline, N-ethyl aniline, N,N di-methyl aniline and secondary-butyl acetate when used as blending components in unleaded petrol |