Standards update - Manufacturing
Full list
Aircraft and space vehicle engineering
BS EN 12312-15:2020 | Aircraft ground support equipment. Specific requirements. Baggage and equipment tractors |
BS EN 16602-70-17:2020 | Space product assurance. Durability testing of coatings and surface finishes |
BS EN 6046:2020 | Aerospace series. Bearing, spherical, plain, in corrosion resisting steel. Narrow series. Dimensions and loads. Inch series |
Agriculture
BS EN ISO 10517:2019 | Powered hand-held hedge trimmers - Safety |
BS EN ISO 25119-1:2018 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems. Part 1: General principles for design and development |
BS EN ISO 25119-4:2018 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems. Part 4: Production, operation, modification and supporting processes |
BS EN ISO 4254-5:2018 | Agricultural machinery - Safety. Part 5: Power-driven soil-working machines |
BS EN ISO 4254-8:2018 | Agricultural machinery - Safety. Part 8: Solid fertilizer distributors |
BS ISO 13772:2018+A1:2020 | Forestry machinery. Portable chain-saws. Non-manually actuated chain brake performance |
Chemical technology
PD CEN/TS 17441:2020 | Laboratory installations. Ventilation systems in laboratories |
Electrical engineering
BS EN 60570:2003+A2:2020 | Electrical supply track systems for luminaires |
BS EN 60598-2-22:2014+A1:2020 | Luminaires. Particular requirements. Luminaires for emergency lighting |
BS EN 61810-1:2015+A1:2020 | Electromechanical elementary relays. General and safety requirements |
BS EN IEC 61293:2020 | Marking of electrical equipment with ratings related to electrical supply. Safety requirements |
BS EN IEC/IEEE 82079-1:2020 | Preparation of information for use (instructions for use) of products. Principles and general requirements |
BS EN IEC 63093-5:2018 | Ferrite cores. Guidelines on dimensions and the limits of surface irregularities. EP-cores and associated parts for use in inductors and transformers |
BS IEC 60287-3-1:2017 | Electric cables. Calculation of the current rating. Operating conditions. Site reference conditions |
PD IEC TS 62196-3-1:2020 | Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system |
Electronics
BS EN IEC 62435-3:2020 | Electronic components. Long-term storage of electronic semiconductor devices. Data |
BS EN IEC 62812:2019 | Low resistance measurements. Methods and guidance |
BS EN IEC 63171-6:2020 | Connectors for electrical and electronic equipment. Detail specification for 2-way and 4-way (data/power), shielded, free and fixed connectors for power and data transmission with frequencies up to 600 MHz |
BS EN ISO 11554:2017 | Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics |
BS IEC 60191-2:1966+A21:2020 | Mechanical standardization of semiconductor devices. Dimensions |
Fluid systems and components for general use
BS EN 14025:2018 | Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction |
BS EN ISO 10961:2019 | Gas cylinders. Cylinder bundles. Design, manufacture, testing and inspection |
BS EN ISO 11117:2019 | Gas cylinders. Valve protection caps and guards. Design, construction and tests |
BS ISO 10770-3:2020 | Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for pressure control valves |
BS ISO 23088:2020 | Gas cylinders. Periodic inspection and testing of welded steel pressure drums. Capacities up to 1 000 l |
PD CEN/TR 1591-2:2020 | Flanges and their joints. Design rules for gasketed circular flange connections. Gasket parameters |
Glass and ceramics industries
BS ISO 21712:2020 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural bond strength of ceramics |
BS ISO 21713:2020 | Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of elastic modulus of ceramics at high temperature by thin wall C-ring method |
Image technology
BS ISO 22576:2020 | Optics and photonics. Optical materials and components. Specification of calcium fluoride used in the infrared spectrum |
Information technology
BS EN ISO 16484-6:2020 | Building automation and control systems (BACS). Data communication conformance testing |
BS EN ISO 25119-1:2018 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems. Part 1: General principles for design and development |
BS EN ISO 25119-4:2018 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems. Part 4: Production, operation, modification and supporting processes |
BS IEC 60050-741:2020 | International Electrotechnical Vocabulary (IEV). Internet of Things (IoT) |
BS ISO 14813-5:2020 | Intelligent transport systems. Reference model architecture(s) for the ITS sector. Requirements for architecture description in ITS standards |
BS ISO 19414:2020 | Intelligent transport systems. Service architecture of probe vehicle systems |
BS ISO 20524-1:2020 | Intelligent transport systems. Geographic Data Files (GDF) GDF5.1. Application independent map data shared between multiple sources |
BS ISO 20616-2:2020 | Graphic technology. File format for quality control and metadata. Print Quality eXchange (PQX) |
BS ISO 22078:2020 | Intelligent transport systems. Bicyclist detection and collision mitigation systems (BDCMS). Performance requirements and test procedures |
PD CEN ISO/TS 21177:2019 | Intelligent transport systems. ITS station security services for secure session establishment and authentication between trusted devices |
PD CEN/TR 17401:2020 | Intelligent transport systems. Urban-ITS. Mixed vendor environment guide |
PD CEN/TS 13149-7:2020 | Public transport. Road vehicle scheduling and control systems. System and network architecture |
PD CEN/TS 16702-1:2020 | Electronic fee collection. Secure monitoring for autonomous toll systems. Compliance checking |
PD CEN/TS 16702-2:2020 | Electronic fee collection. Secure monitoring for autonomous toll systems. Trusted recorder |
PD CEN/TS 17380:2019 | Intelligent transport systems. Urban-ITS. 'Controlled Zone' management for UVARs using C-ITS |
PD CEN/TS 17413:2020 | Intelligent transport systems. Urban ITS. Models anddefinitions for new modes |
PD ISO/IEC TS 20748-3:2020 | Information technology for learning, education and training. Learning analytics interoperability. Guidelines for data interoperability |
PD ISO/TS 15638-4:2020 | Intelligent transport systems. Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV). System security requirements |
PD ISO/TS 16785:2020 | Electronic Fee Collection (EFC). Application interface definition between DSRC-OBE and external invehicle devices |
PD ISO/TS 19082:2020 | Intelligent transport systems. Definition of data elements and data frames between roadside modules and signal controllers for cooperative signal control |
PD ISO/TS 21193:2019 | Electronic fee collection. Requirements for EFC application interfaces on common media |
Manufacturing engineering
BS EN 62841-3-4:2016+A12:2020 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for transportable bench grinders |
BS EN ISO/ASTM 52915:2020 | Specification for additive manufacturing file format (AMF) Version 1.2 |
BS EN ISO 11148-13:2018 | Hand-held non-electric power tools. Safety requirements. Fastener driving tools |
BS ISO/ASTM 52903-1:2020 | Additive manufacturing. Material extrusion-based additive manufacturing of plastic materials. Feedstock materials |
BS ISO 13041-1:2020 | Test conditions for numerically controlled turning machines and turning centres. Geometric tests for machines with horizontal workholding spindle(s) |
BS ISO 17543-1:2020 | Machine tools. Test conditions for universal spindle heads. Accessory heads for machines with horizontal spindle (horizontal Z-axis) |
BS ISO 22688:2020 | Brazing. Quality requirements for brazing of metallic materials |
BS ISO 24497-1:2020 | Non-destructive testing. Metal magnetic memory. Vocabulary and general requirements |
BS ISO 24497-2:2020 | Non-destructive testing. Metal magnetic memory. Inspection of welded joints |
Materials handling equipment
BS EN 1459-1:2017+A1:2020 | Rough-terrain trucks. Safety requirements and verification. Variable-reach trucks |
BS ISO 10896-1:2020 | Rough-terrain trucks. Safety requirements and verification. Variable-reach trucks |
BS ISO 21455:2020 | Mobile elevating work platforms. Operator's controls. Actuation, displacement, location and method of operation |
BS ISO 22915-15:2020 | Industrial trucks. Verification of stability. Counterbalanced trucks with articulated steering |
Mechanical systems and components for general use
BS EN ISO 3506-1:2020 | Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners. Bolts, screws and studs with specified grades and property classes |
BS ISO 11687-3:2020 | Plain bearings. Pedestal plain bearings. Centre flange bearings |
BS ISO 12130-2:2020 | Plain bearings. Hydrodynamic plain tilting pad thrust bearings under steady-state conditions. Functions for calculation of tilting pad thrust bearings |
BS ISO 12130-3:2020 | Plain bearings. Hydrodynamic plain tilting pad thrust bearings under steady-state conditions. Guide values for the calculation of tilting pad thrust bearings |
BS ISO 3506-6:2020 | Fasteners. Mechanical properties of corrosion-resistant stainless steel fasteners. General rules for the selection of stainless steels and nickel alloys for fasteners |
Metallurgy
BS EN 10139:2016+A1:2020 | Cold rolled uncoated low carbon steel narrow strip for cold forming. Technical delivery conditions |
BS EN 12735-1:2020 | Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration. Tubes for piping systems |
BS EN ISO 643:2020 | Steels. Micrographic determination of the apparent grain size |
PD CEN/TS 13388:2020 | Copper and copper alloys. Compendium of compositions and products |
Metrology and measurement
BS EN ISO 10360-5:2020 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS). Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode |
BS EN ISO 20361:2019+A11:2020 | Liquid pumps and pumps units. Noise test code. Grades 2 and 3 of accuracy |
BS ISO 14830-1:2019 | Condition monitoring and diagnostics of machine systems. Tribology-based monitoring and diagnostics. General requirements and guidelines |
BS ISO 14830-1:2019 | Condition monitoring and diagnostics of machine systems. Tribology-based monitoring and diagnostics. General requirements and guidelines |
BS ISO 16063-34:2019 | Methods for the calibration of vibration and shock transducers. Testing of sensitivity at fixed temperatures |
BS ISO 7626-5:2019 | Mechanical vibration and shock. Experimental determination of mechanical mobility. Measurements using impact excitation with an exciter which is not attached to the structure |
Mining and minerals
BS ISO 19426-4:2018 | Structures for mine shafts. Conveyances |
PD ISO/TS 21826:2020 | Iron ores. Determination of total iron content. EDTA photometric titration method |
Natural and applied sciences
PD IEC TS 62607-5-3:2020 | Nanomanufacturing. Key control characteristics. Thin-film organic/nano electronic devices. Measurements of charge carrier concentration |
PD ISO/TS 11308:2020 | Nanotechnologies. Characterization of carbon nanotube samples using thermogravimetric analysis |
PD ISO/TS 21237:2020 | Nanotechnologies. Air filter media containing polymeric nanofibres. Specification of characteristics and measurement methods |
Packaging and distribution of goods
BS EN ISO 12822:2020 | Glass packaging. 26 H 126 crown finish. Dimensions |
Paint and colour industries
BS EN ISO 3262-1:2020 | Extenders. Specifications and methods of test. Introduction and general test methods |
BS ISO 22553-11:2020 | Paints and varnishes. Electro-deposition coatings. Bath stability |
Precision mechanics. Jewellery
BS ISO 22764:2020 | Jewellery and precious metals. Fineness of solders used with precious metal jewellery alloys |
Railway engineering
BS EN 12930:2015 | Safety requirements for cableway installations designed to carry persons. Calculations |
BS EN 15227:2020 | Railway applications. Crashworthiness requirements for rail vehicles |
BS EN 15611:2020 | Railway applications. Braking. Relay valves |
BS EN 50119:2020 | Railway applications. Fixed installations. Electric traction overhead contact lines |
BS EN 50306-1:2020 | Railway applications. Railway rolling stock cables having special fire performance. Thin wall. General requirements |
BS EN 50306-2:2020 | Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Single core cables |
BS EN 50306-3:2020 | Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Single core and multicore cables screened and thin wall sheathed |
BS EN 50306-4:2020 | Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Multicore and multipair screened or not screened sheathed cables |
PD CEN/TR 17469:2020 | Railway applications. Axle design method |
Road vehicles engineering
BS EN ISO 17268:2020 | Gaseous hydrogen land vehicle refuelling connection devices |
BS ISO 14687:2019 | Hydrogen fuel quality — Product specification. Part : All applications except proton exchange membrane (PEM) fuel cell for road vehicles |
BS ISO 19880-1:2020 | Gaseous hydrogen. Fuelling stations. General requirements |
BS ISO 19880-5:2019 | Gaseous hydrogen. Fuelling stations. Dispenser hoses and hose assemblies |
BS ISO 19880-8:2019 | Gaseous hydrogen. Fuelling stations. Fuel quality control |
BS ISO 9021:2020 | Motorcycles and mopeds. Controls. Types, positions and functions |
PD CEN/TS 13149-7:2020 | Public transport. Road vehicle scheduling and control systems. System and network architecture |
Rubber and plastic industries
BS EN ISO 17178:2020 | Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements |
BS EN ISO 19064-2:2020 | Plastics. Styrene-acrylonitrile (SAN) moulding and extrusion materials. Preparation of test specimens and determination of properties |
BS EN ISO 19066-2:2020 | Plastics. Methyl methacrylate-acrylonitrile-butadienestyrene (MABS) moulding and extrusion materials. Preparation of test specimens and determination of properties |
BS ISO 20911:2020 | Radio frequency identification (RFID) tyre tags. Tyre attachment classification |
BS ISO 20912:2020 | Conformance test methods for RFID enabled tyres |
BS ISO 506:2020 | Rubber latex, natural, concentrate. Determination of volatile fatty acid number |
Shipbuilding and marine structures
BS EN IEC 61162-460:2018+A1:2020 | Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Multiple talkers and multiple listeners. Ethernet interconnection. Safety and security |
BS EN ISO 10240:2020 | Small craft. Owner's manual |
BS EN ISO 11105:2020 | Small craft. Ventilation of petrol engine and/or petrol tank compartments |
BS EN ISO 8848:2017 | Small craft - Remote steering systems |
Telecommunications. Audio and video engineering
BS EN 61300-2-19:2013 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Damp heat (steady state) |
BS EN IEC 61300-2-4:2019+A1:2020 | Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Fibre or cable retention |
BS EN IEC 62368-3:2020 | Audio/video, information and communication technology equipment. Safety aspects for DC power transfer through communication cables and ports |
PD IEC TR 61292-3:2020 | Optical amplifiers. Classification, characteristics and applications |
Testing
PD IEC TR 63141:2020 | Damp heat, steady state (unsaturated pressurized vapour with air) |
Textile and leather technology
BS EN ISO 14088:2020 | Leather. Chemical tests. Quantitative analysis of tanning agents by filter method |
BS EN ISO 17131:2020 | Leather. Identification of leather with microscopy |
BS EN ISO 20706-1:2019 | Textiles. Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends. Fibre identification using microscopy methods |
BS ISO 11567:2018 | Carbon fibre. Determination of filament diameter and cross-sectional area |
BS ISO 22195-1:2020 | Textiles. Determination of index ingredient from coloured textiles. Madder |
BS ISO 7211-6:2020 | Textiles. Methods for analysis of woven fabrics construction. Determination of the mass of warp and weft per unit area of fabric |
Wood technology
BS EN ISO 19085-4:2018 | Woodworking machines - Safety. Part 4: Vertical panel circular sawing machines |
BS EN ISO 19085-8:2018 | Woodworking machines - Safety. Part 8: Belt sanding and calibrating machines for straight workpieces |
BS EN ISO 19085-11:2020 | Woodworking machines. Safety. Combined machines |